Is thermal transfer silicone the same as the trademark silicone?

November 25, 2020


Silicone meets all the advantages of clothing trademark and garment printing. It also has high temperature resistance and corrosion resistance. It is also non-toxic, harmless and tasteless. It has passed the characteristics of FDA food certification, so silicone led the industry to a new high!

At present, there are two kinds of silica gel trademarks on the market. One is direct epoxy molding, and the molded silicone gel is used. One is to pass silk screen, transfer glue, and hot melt adhesive to the high temperature resistant screen. On the type film, and then use the "hot press machine" to re-hot to the surface of the carrier such as cloth, so the thermal transfer silicone is not the same as the trademark silicone! For more information about the two types of silicone, you can contact us by phone (WeChat with the same number) Week S Exclusive: hfdd1993!

The thermal transfer silica gel is prepared by uniformly dispersing the silica gel thermal transfer coating glue in a 1:1 manner, printing on the surface of the silica gel, once two knives, waiting for 5 minutes, baking and drying. Reprint one more knife, wait for 5 minutes, bake to the surface, and then print the hot melt glue (hot melt glue should be diluted with toluene or cyclohexanone). Remove the film, put it into the oven, bake at 80 degrees for 30 minutes, then bake at 150 degrees for 30 minutes, and then transfer it to cool. 150 degrees can be pressed for 6-8 seconds.

Trademark Silicone is a kind of printed silica gel used for embossing machines on textiles. It is suitable for high-frequency, hot-pressing and other trademarks with strong three-dimensionality. The trademark silicone is a kind of screen printing that can be firmly adhered. Special silica gel on the surface of textiles, non-woven fabrics, etc., silicone trademark can be made in a variety of LOGO patterns, can be used for knitwear, cotton fabric, Lycra elastic fabric and fiber fabric made of PU!
Http://news.chinawj.com.cn Is thermal transfer silicone the same as the trademark silicone?

1. Use Surface Mount System to install electron component. High quality stable and more quality consistency.

2. Pass germany TUV testing, have EMC and LVD certificate.

3. The AC input power voltage is made between 85V to 240V. So it could select AC input voltage automatically. You could work in AC USA 110V or AC europe 220-240V.

4. CEL: Cellulose electrode is special electrode to lay big pipe on oil and chemical industry, natural gas, electric power, civil pipeline of oil, gas, water. They need high ilder voltage (more than 90V). This machine could do

Inverter DC MIG Welder

MIG Welders, Miller MIG Welder, Used Welders

YongKang WALMA Tools CO., LTD. , http://www.walmatools.com