How to distinguish solid wood furniture, understand these 10 strokes is no longer difficult

June 14, 2020

Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%BC%D2%BE%DF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })

Many families choose high-end solid wood furniture. Most of the solid wood furniture is made of natural solid wood. Using the material of the solid wood and then beautifying the craft, it gives us a good visual effect. But now the solid wood furniture on the market is mixed, then everyone knows how to distinguish solid wood furniture. ?

What is solid wood furniture

Solid wood furniture refers to pure solid wood furniture, that is, all materials are natural materials that have not been reprocessed, and do not use any wood-based furniture. The solid wood home has pure solid wood furniture and imitation wood furniture. Pure solid wood furniture means that all the materials of the furniture are solid wood, including the table top, the door panel of the wardrobe, the side panels, etc. are all made of pure solid wood, and no other type of artificial board is used.

How to distinguish solid wood furniture

Check the strength. The strength of the board surface can be pressed with a finger to feel the firmness of the board surface. One side of the material should have a well-shaped skeleton to fix. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate greatly. The bottom of the drawer should be pressed by hand to test the strength. Generally, the bottom of the partition is multi-layered with a large area. The partition should be made of five-layer board.

Look at the wood grain. Such as a cabinet door, the appearance looks like a pattern, then the position corresponding to the change of the pattern, the corresponding pattern on the back of the cabinet door, if the correspondence is very good, it is a pure solid wood cabinet door.

Determine the tree species. This is a factor that directly affects price and quality. Ordinary solid wood furniture usually uses eucalyptus, white oak, ash, eucalyptus, eucalyptus, rubber wood and eucalyptus. At the same time, it should be noted that the price of wood is rising day by day, and it is absolutely cheap to be too cheap.

Observe the wood. Open the furniture cabinet door and drawers and observe whether the wood is dry and white, and the texture is tight and delicate. Also smell the irritating smell, if any, consider whether it is made of materials such as particle board, MDF and one-time forming board.

Touch the surface. Place your hand on the surface of the furniture and carefully check whether the polished surface is smooth. In particular, check whether the table legs are rough, whether the paint is streaked, whether the pigment in the corner is too thick, and whether there are cracks or bubbles.

Look for defects. The main stress parts of the furniture, such as columns and legs, should not have large thrift or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material.

safety. Observe the presence or absence of the drawer or the door frame tilting phenomenon, whether there is a structural problem caused by the inferior level of the craftsmanship such as the twisted eye position or the excessive eye hole and the unsatisfactory hoe. Wooden furniture should be safe and stable. When the two doors are opened 90 degrees, the hand should be gently pulled forward, and the cabinet should not be tilted forward automatically; the glass of the bookcase door should be edging.

Check the interface. Heavier furniture should be screwed with a protective block at the corner and glued. As for the back plate part, it is also necessary to check whether it is set and the screws are attached.

Test the slide. The drawer should be strong and secure with the screws tightened inside. Pull out the drawers, the event table, the door and other parts to see if they can move freely.

"Inverted" test. As for the table, check from the bottom. See if the seams are reinforced with screws and wedges, and the slats are fastened to the crosspieces? There are no excess glue or filler in the seams.

Chop Bone Knife is different from general Kitchen Knives. It is a Knife mainly use for bone-cutting. Certainly, it is no doubt that the blade material and hardness are extremely important for the chop bone knife. We have different specifications of chop bone knives. Some knives' blade material are made of 3CR13 and others are consist of 3CR13 with laser cladding alloy powder steel. We have a variety of specifications Chef Knife for your choice.

Chop Bone Knife

Chopping Knife,Bone Cutting Knife,Stainless Steel Bone Cutting Knife,Stainless Steel Boning Knife